J-LİNK J-link V9 Jtag Programlayıcı Jlınk Programmer Debugger

Ürün klon Jlink v9 programlayıcıdır. Ürün ile alakalı hiç bir teknik destek verilmez. Ürün paketi açılarak test edilir. Çalıştığı görülerek kargolanır. Description J-Link is a USB powered JTAG emulator supporting a large number of CPU cores. ; Based on a 32-bit RISC CPU, it can communicate at high speed with the supported target CPUs. J-Link is used around the world in tens of thousand places for development and production (flash programming) purposes. ; J-Link is supported by all major IDEs such as IAR EWARM, Keil MDK, Rowley CrossWorks, Atollic TrueSTUDIO, IAR EWRX, Renesas HEW, Renesas e2studio, and many others. ; Including all models, more than 100,000 J-Links have been sold so far, making J-Link probably the most popular emulator for ARM cores and the de-facto standard. ; Features Direct download into flash memoryof most popular microcontrollers supported ; Supported CPUs: Any ARM7/9/11, Cortex-A5/A8/A9, Cortex-M0/M1/M3/M4, Cortex-R4, RX100/RX200/RX610/RX621/RX62N/RX62T/RX630/RX631/RX63N ; Download speed up to 1 MByte/second ; Supportsunlimited breakpointsin flash memory!1More info... ; Setting breakpoints inexternalflash memory of Cortex-M systems is possible with ; J-Link'sUnlimited Flash Breakpointstechnology only! ; Supported by all major IDEsMore info... ; Supports concurrent access to CPU by multiple applications3 ; Crossplatform support (runs on Windows, Linux, Mac OS X)4 ; Intelligence in the emulator firmwareMore info... ; Remote Server included. Allows using J-Link remotely via TCP/IPMore info... ; GDBServer includedMore info... ; Production flash programming software (J-Flash) availableMore info... ; Software Developer Kit (SDK) availableMore info... ; Supports multiple target interfaces: JTAG, SWD ; Supports SWV/SWO (Serial Wire Viewer / Serial wire output) ; Wide target voltage range: 1.2V - 3.3V, 5V tolerant ; Supports JTAG chains with multiple devices ; Embedded Trace Buffer (ETB) support ; Various target adapters available, including optical isolation adapter.More info... ; RDI interface DLL available.More info... ; Fully plug and play compatible ; No power supply required, powered through USB ; Support for adaptive clocking ; All JTAG signals can be monitored, target voltage can be measured ; Target power supply: J-Link can supply up to 300 mA to target with overload protection ; Package? 1x J-link V9 ARM Emulator ; 1x USB Cable ; 1x Connector Cable ;